• January 13. 2022

The processing method of precision parts includes using the programmability of the machining center to reasonably compile the numerical control machining program, and optimizing the cutting parameters by utilizing the humanized characteristics of the machining center. Reasonable selection of tool geometry and the use of ordinary high-speed steel drills and end mills to process high-precision and l...

• January 19. 2022

Commonly used heat treatment methods include integral heat treatment, surface heat treatment and deformation heat treatment. The overall heat treatment is the "four fires" that people often hear in the factory, which refers to the four most commonly used heat treatment methods: annealing, normalizing, quenching and tempering. Among them, quenching and tempering are closely related and are often us...

• January 26. 2022

In the processing of precision mechanical parts, many steps are required to produce and process a qualified precision mechanical part. If it is some simple mechanical parts processing, there may only be three or four steps, and complex ones may take as many as ten steps. We determine the processing steps according to the processing technology of mechanical parts. A machining factory of a certain s...

• February 17. 2022

With the development of modern science and technology, the performance of modern industry on the surface of various equipment parts is also getting higher and higher, especially the parts after precision machining, which work under the conditions of high temperature, corrosion, high speed, high pressure, etc. Destruction often starts at the surface. For example, high-temperature oxidation, wear, e...

• March 03. 2022

Aluminium profile fittings are used to join aluminium profiles to assemble them into the desired profile frame. Conventional aluminum profile accessories include: bolts and nuts, slot connectors, corners, corner brackets, various types of connector plates, and more. Sometimes these parts need to be machined for installation or to optimize the design. Because aluminium profile fittings are cast or ...

• March 11. 2022

Entering the 5G era, artificial intelligence has become the focus of CNC machining enterprises, providing a technical foundation for the transformation and upgrading of these enterprises. According to a survey of CNC machining plants in Shenzhen, 30% of users of CNC lathe machining enterprises that use artificial intelligence on a large scale or adopt artificial intelligence in their core business...

• April 01. 2022

3D printing and CNC machining are relatively common production processes in the field of precision machining. There are similarities and differences between the two. For example, CNC machining is more suitable for mass production. It can create many products in a short time. 3D printing needs It takes hours to create a product. Compared with 3D printing, CNC machining has the following advantages:...

• April 09. 2022

The deformation of parts in machining is difficult to avoid. The main reasons are as follows: The material and structure of the part will affect the deformation of the part. The amount of deformation is proportional to the complexity of the shape, the aspect ratio and the wall thickness, and is proportional to the rigidity and stability of the material. Therefore, the influence of these factors on...

• April 29. 2022

Hardware parts refer to various metal utensils made of iron, steel, aluminum and other metals through physical processing such as forging, rolling, cutting, etc. The traditional cleaning methods we use are mainly divided into chemical cleaning and physical cleaning according to the different cleaning methods. Chemical cleaning refers to the method of using chemicals or other solvents to remove dir...